“Be very careful or you could make things worse.”
With that advice in mind, I began my Rifing for Lyme journey. It’s now a few months and 27 treatments later and nothing terrible has happened, so that’s good. And I feel I’ve learned enough to make it worth sharing my experiences.
For those not familiar with Rife, the idea is that every living thing has a frequency. In the case of Lyme and its coinfections, the Rife machine sends a frequency aimed at a specific microbe, and this frequency resonates with the microbe, causing it to vibrate, and in the process either get damaged or destroyed.
It is called Rife because a pioneer of this technique was named Royal Raymond Rife. This guy, a scientist and inventor in the early 1900s, was a definite genius.
Today, there are many types of Rife machines named in his honor. I use the Doug Coil machine, which was created by Doug MacLean. Back in the 1980s, MacLean, a mechanical engineer, constructed this machine and successfully treated his own Lyme case, which had not responded to antibiotics.
I started my Rife odyssey cautiously, by doing lots of research – Rife websites, a couple of Rife books, and then reading thousands upon thousands of posts in various online forums. From those sources, I chose what I felt sounded like the four most promising frequencies – 432, 612, 840 and 2016.
My first rule was to Rife as often as possible, but only to start the next session after I thought I’d finished detoxing from the last one. So I did 13 sessions in the first 23 days, but then I found I was getting tired more quickly than usual after exercise. I guessed that the treatments were taxing my adrenals, so I took a few weeks off to adjust my adrenal support so this tiredness was no longer an issue.
The problem, it seemed, was that while I thought my body had recovered from a session, I really hadn’t given it quite enough time to recover. While I first thought the sweet spot for me was four sessions a week, it’s really two or three times weekly depending on how things go with each treatment.
So lesson one for me was wait until I’m sure I’m sure I’m ready for the next session. Lesson two was that each Rife treatment is an experiment, and you never really know how it’s going to turn out.
In any case, I felt that Phase 1 was a moderate success. Overall, I felt a bit stronger, and I could see this at the gym, where I noticed a substantial gain in how much I could lift on the leg machines. And the herxes were only mild, but there were enough symptoms, like gas, stomach gurgling, neck and joint pain, to let me know the Rife machine was working every time I turned it on.
I’d say I’m now in Phase 2, with another 14 treatments behind me to go along with the initial 13. What I’ve done lately is to better sort out which frequencies are most useful for me. My goal was to first treat just the Lyme Borrelia organism before moving on to the coinfections, but a belated look at a cross-referenced Consolidated Annotated Frequency List (CAFL) gave me a hint as to perhaps why treatments in the first phase were more taxing than I had expected.
The problem with 432 for me is that it also hits Babesia and is also an immune booster. This is a good thing for some people, but my system is easily overly boosted, and while I found the 432 had beneficial effects it also seemed to cause autoimmune-like symptoms such as knee pain.
The 612 frequency not only hits Borrelia, but it also hits the Coxsackie and Echo viruses, both of which I believe I have. The 840 also resonates with Bartonella and Klebsiella pneumonaie, which are two more suspects in my pile of microbes. So since I wanted to focus at first on Borrelia, I’m now working solely on 2016.
Here’s a thumbnail sketch of how each frequency has gone for me, noting what symptoms they’ve provoked. I’d say all the frequencies have been positive, ranging from mildly positive to moderately positive, with the total effect being a moderate net gain in strength. You’ll note the run times are fairly short, but it’s my understanding that the Doug Coil is one of the most powerful machines available, and generally a beginner needs to stick with short sessions.
432 – 8 sessions totaling 37 minutes: improved stool, feel bit tired, bloating, heat in back and chest, stomach gurgling, gas, strange feeling in brain, right knee and thigh soreness, red stripe rashes on back, nausea, nasal congestion, muscle soreness, shoulder pain, urinary irritation.
612 – 4 sessions totaling 14 minutes: vibrating feeling during session, urinary irritation, shoulder soreness, nausea, morning fatigue, sleep longer than usual, unusual feeling in head, spacey feeling, sore neck and back.
840 – 5 sessions totaling 6 minutes, 15 seconds: stomach gurgling, nausea, shoulder soreness, cool feeling in back, sleep longer than usual, dark urine, bloating, warm feeling in back.
2016 – 10 sessions totaling 11 minutes, 30 seconds: strange feeling in head, gas pain, bloating, heat in chest and back, tiredness in evening, sleep longer than usual, gas, spacey feeling, foot pain, mild dizziness.
All that doesn’t sound like a ton of fun, but like most people with Lyme, I’ll gladly trade a pack of mild detox symptoms for overall improvement. So after 27 treatments, I’m glad I took that initial warning seriously. I can’t say I’m a whole lot better than when I started Rifing, but I feel that solid progress has been made.
And at least I can say I haven’t made things worse.
4 thoughts on “Rife: Notes from a newbie”
Interesting to hear your experiences, I have just borrowed a Doug coil and thought I should do some checks first before use. I used a free Android App called Spectroid which is sound frequency measuring software see – https://play.google.com/store/apps/details?id=org.intoorbit.spectrum&hl=en_GB . I connected a small speaker direct to the signal generator and measured the sound with Spectroid. With the signal generator set to 612Hz it was reading a peak of 614Hz, so fairly close. When measuring the coil output (hum) with Spectroid, with the appropriate capacitor box switches set to the table provided for 612, it is approximately double the frequency, so the coil, amp and capacitor box appear to be doubling the frequency in the audible band, it would be interesting to know if others Doug coils do the same or if something is wrong with the one I have.
You need to take MMS to hit the biofilms. The Rife won’t break them up. Once they are open start coiling and it’ll mop up what was inside the biofilms. With out this you’ll clear ever outside the films but that’s it. It’s a very important step.
Could you tell me how you use MMS? Based on Jim Humble (2016)? Do you also use MMS2? I can’t keep up with 8 hours/day, do you think less is enough?
The comment you are replying to wasn’t made by me, but by a reader of the blog.